Fireproof tarpaulin (large area fireproof welding blanket) is processed by special process. Main features: non-flammable, high temperature resistant (550~1100 degrees), sealed, non-irritating, anti-corrosive, soft and tough, convenient for wrapping objects and equipment with uneven surfaces. It can well protect objects away from hot spots and spark areas, and completely prevent or isolate combustion.
Principle of use
Because the tarpaulin itself has a heat insulation function, it can delay the combustion and explosion time of dangerous goods or precision instruments, so there is time to be discovered and rescued.
Scope of use
The tarpaulin is used for safety protection in the production, storage and transportation of flammable and explosive dangerous goods and precision instruments and equipment. How to use
When using, the dangerous goods and precision instruments and equipment should be completely covered to prevent combustion and explosion caused by small sparks. Folding method
a) Spread the tarpaulin flatly with the front side facing up, leaving two side ropes, and fold the two sides of the length direction to the longitudinal center line of the tarpaulin.
b) Divide the folded sides into three equal parts and fold them twice towards the center line.
c) Fold the two sides of the tarpaulin in the width direction towards the horizontal center line of the tarpaulin, and then fold them in half three times in a row and then tamp them down. The folded dimensions are about 1000mm×600mm×300mm.
d) Use the reserved rope to tie the tarpaulin in a cross shape on both sides, tighten and tie it tightly, tuck the rope end in, and it should not be loose or the rope buckle should not fall off, and it should not be dragged.
e) After folding, the small road logo and tarpaulin number on the tarpaulin should be completely and clearly exposed.